HSVF COOL FOG

HSVF( High Speed Vibiration Fog System)

There're 2 common ways for artificial fogging. The first is to spray water drops into air current with high speed. Then the drops will be broken into tiny pieces. The method consume a large amount of energy, consequently, it is not economical enough for commercial fog-making. The other way is to evaporize water and spread it into frozen air current with low speed. This method for cool fog also cosumes lots of energy in the course of air-regrigerating, therefore, it is not suitable to make artificial fog in the way at a large scale, either. HSVF artificial fog system, owing to its advanced techology, can overcome the shortcomimgs of the above two ways, and it can make cool, clean and healthy artificial fog at a very low energy consumption.
HSVF system mainly consists of 5 systems, and they go as follows:
1. Music Fountain Water treatment system: it filtrates the impurities and floatings from water, in the meantime, KDF filter eliminates harmful elements like chlorides and heavy metal(Pb, Hg, Cr.), and the filter can be cleaned by repeated washing.
2.High pressure pump system: it is the heart of HSVF fog system. The pump is imported world-famous product, and the pressure could be adjusted to the actually need. （Maximum pressure 14Mpa）， the device has reliable operation, long using life and very little noise.
3.High pressure tube system: both the tubes and the connectors are made of stainless steel with easy installation and reliable operation.




4.Vibiration Nozzle System: It is also a critical part. By the means of usage purpose, vibiration nozzles fall into 2 types: a. HSVF type for seneric use, it can produce fog ranging from 2-10 um; b. HSVFL type for agriculture and powltry, fog ranging from 30-50um. By the means of material, vibiration nozzles are of 3 types：Rigid Stainless Steel, Carborundum and Red Gem.

HSVF Series Capacity for Cool Fog

Applications Of HSVFArtificial Fog System
Devided by means of usage, artificial fog falls into two types： Sceneric Fog and Cool Fog. The former’s fog-particle is smaller than 10um, which is just the same size of natural fog. It is mostly used for sceneric using, temperature lowing and moisture preservation. The latter’s fog-particle ranges from 30um to 50um, mostly used for lowering temperature, increase humidity and medicine spraying.
To detail the functions of artificial fog:

  

    



• Scenery-making: It’s widely used in gardens, parks and architectures.
• Temperature lowering: The air could be cooled fast through evaporating.
• Disinfection: The fog can distribute medicine evenly and fastly for the purpose of sterlization.
• Agricultural Irrigation: Fog can spray water and medicine evenly.
• Deodorization: Anions, called as “Air Vitalmin”, will be produced at large scales in artifical fog, which does not only beutify the enviroment, but also contributes to people’s health.
  

Technological Parametres for Artificial Fog Main Pump

Module No.	Rated Power（KW）	Flow Vol. （L/min）	Rated output Pressure (Mpa)	Inlet Diametre	Outlet Diametre
HSVF 65	2.2	6.6	5	0.5”	3/8”
HSVF 110	3	10.7	5	0.5”	3/8”
HSVF 150	4	14.7	5	0.5”	3/8”
HSVF 200	5.5	20.8	5	0.5”	3/8”

Technological Parametres for HSVP Cool Fog Nozzles

  

Nozzle Module	Flow Vol. (L/min) under different pressure（Mpa）
	4	5	6	7	8	9	10
HSVF-45R	0.049	0.053	0.059	0.066	0.072	0.077	0.084
HSVF-5R	0.053	0.059	0.068	0.076	0.084	0.091	0.098
HSVF-6R	0.072	0.079	0.089	0.097	0.103	0.113	0.120
HSVF-8R	0.127	0.144	0.161	0.174	0.192	0.208	0.224
HSVF10R	0.201	0.227	0.252	0.273	0.292	0.313	0.334
HSVF-12R	0.265	0.291	0.320	0.343	0.368	0.393	0.418