	Home
	About Us
	Nozzle
	Hsvf Cool Fog
	Water Screen Laster&Movie
	Digital Water Curtain
	Fountain Lighting
	Music Fountain Pump System
	Music Fountain Control System
	Classics We Construeted
	Contact Us
	Partial Projects Achievement

Address: No.199, Zhenhua Road, Hunan Enviromental Technology and Industry Zone, Changsha,China.
Tel: 0086-731-82685050
Fax: 0086-731-82685110
email:
frank@chinamusicfountain.com alternative:
himalayafountains@gmail.com

1.Minei Park (Teheran, Iran), the project is included with the following water patterns: UFO, Chasing Jets, Water Waltz, Huge Round Chasing Jets, the total investment is $2,000,000, the project was finished in February, 2005.

2.Sharak Park(Teheran, Iran), the project is made up of 15 water patterns, including Super Long Horizontal Swing, Super-long Vertical Swing, Super-large Round Swing, HSVF Fog System. The total investment is $4,000,000, it was Constructed in July, 2005.

3.Arabian Public Park(Abu Dhabi), it is a typical floating fountain, 8X30m + 3x100m, and it is featured with 100 groups of 3-dimensional nozzles. The total amount is USD 970,000. And its construction is finished in June,2006.

4.Siamak Ayoubi Shopping Mall, it is an indoor music fountain, mainly made up of cool fog, semi-spherical nozzles, bulbed nozzles. The total investment is USD 673,250. The construction was finished in July,2006.

5.Lake Toya-ko(とうやこ) it is a typical multi-leveled water-fall with a marble fountain-clock in the middle, typical of the latest fountain-type.

6.Hamedan Park (Hamedan Iran) All parts (from nozzles, pumps to every single piece of screw)are stainless steel. The water pattern includes: Special UFO, Water-Screen Movie, Super-high central Nozzle and double-layered crowns. The total cost is $ 2,132,560, and it is finished in Oct.,2009.

7.Rajevi Petro Co.,ltd(Beirut, Lebanon) It is a middle-sized round pool, the total cost is $130,000, and the project was finished in Nov.,2009.

Music Fountain Nozzles

Adjustable current Nozzle

Adjustable current Nozzle is a versatile one; the direction can be adjusted, both vertically and horizontally. In combination with height control from water-pressure and invertors, adjustable current nozzles in groups can be made into various music fountain patterns.

Module No.

Specification

Operating Pressure
（MPa/10）

Water volume
(m3/h)

Height

（mm）

Inch

HCN-01

15

0.5”

0.10~2.5

0.5~2.0

0.40~10

HCN02

20

0.75”

0.10~2.5

0.8~3.5

0.56~12

HCN-03

25

1”

0.10~2.5

0.8~4.7

0.44~15

High Nozzle

High Nozzle is frequently used in the central part of music fountains as the main nozzle, while it can also be adjusted to jet across the fountain, like a rainbow.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Covering Area	Adjustable Water Patterns
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Covering Area	Adjustable Water Patterns
HHN-01	50	2”	0.10~3.0	7.0~20	1.8~20	0.5~5.0
HHN-02	80	3”	0.30~5.0	8.0~50	2.0~40	0.5~8.0

Trumpet Nozzle

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HTN-01	25	1”	0.07~0.09	1.4~1.88	0.56~0.71	0.4~0.85
HTN-02	40	1.5”	0.06~0.09	1.7~2.7	0.54~0.8	0.35~1.2
HTN-03	50	2”	0.05~0.08	3.0~5.0	0.5~0.67	0.5~1.3
HTN-04	15	0.5”	0.07~0.08	1.0~1.5	0.5~0.6	0.3~0.5
HTN-05	20	0.75”	0.07~0.08	1.0~1.5	0.5~0.6	0.3~0.5

Jellyfish Nozzle

Jellyfish Nozzle and Trumpet Nozzle have even water film, elegant pattern and little noise. It is usually used in indoor projects or yard music fountains. Both these two types can only withstand weak winds. The best outlook could be approached through adjusting the attached global valve and the nozzle lid.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HJN-01	25	1”	0.06~0.08	1.0~2.0	0.3~0.5	0.4~0.8
HJN-02	40	1.5”	0.06~0.08	1.5~2.5	0.3~0.5	0.4~1.2
HJN-03	50	2”	0.06~0.08	2.5~3.5	0.4~0.6	0.6~1.2
HJN-04	15	0.5”	0.06~0.09	0.7~0.8	0.3~0.4	0.3~0.4
HJN-05	20	0.75”	0.06~0.08	0.8~1.2	0.3~0.4	0.3~0.6

Fan Nozzle

Fan Nozzle is good for music fountains both outdoors and indoors. Area covered by water and the Spraying angle can be adjusted.

Module No.	Specification		Operating Pressure（MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure（MPa/10）	Water volume (m3/h)	Height	Covering Area
HFN-01	25	1”	0.05~0.08	1.5~2.5	0.2~0.8	0.3~0.7
HFN-02	40	1.5”	0.06~0.10	2.0~3.0	0.3~1.5	0.4~0.8

Cherry-flower Nozzle

The nozzle is made up of three current fountain nozzles（as the flower core） and five fan fountain nozzles. It effect is intense and impressive.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HCFN-01	50	2”	0.10~0.15	8.0~10	0.3~1.6	1.0~2.0
HCFN02	80	3”	0.10~0.20	10~20	0.5~1.8	1.5~2.5

3-layer Flower-basket Nozzle

It is made up of a central nozzle and two layers of adjustable current fountain nozzles. The actual effect will have a water column in the middle and radial water lines around. In combination with LED colored lighting. It can form magnificent flower-basket shapes.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height
HTHN-01	40	1.5”	0.20~1.5	3.0~10	0.6~4	0.4~2.5	0.16~1.5
HTHN-02	50	2”	0.30~1.5	4.0~12	0.6~6	0.5~4.5	0.2~2.5
HTHN-03	80	3”	0.30~1.5	8.0~30	2.0~8	0.7~6.0	0.4~3.5

Central Group Nozzle

7-12 Adjustable current Nozzles are installed to this type. When used as the central nozzle, the water effect is high and the water column is big. And it has very sensitive reaction the invertor-controled fountain pumps.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height
HCGN-01	40	1.5”	0.12~1.5	3.6~10	0.50~2.5
HCGN-02	50	2”	0.20~1.5	4.5~20	0.80~4.5
HCGN-03	80	3”	0.20~1.5	6.5~25	1.6~6.0

Magnolia Flower Nozzle

The Nozzle can form the shape of Magnolia Flowers. Its height and covering area can be adjusted. The effect will look even better when the fountain nozzles are installed in groups.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height		Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height		Covering Area
HMFN-01	25	1”	0.18~0.60	3.0~6.0	1~3	0.6~2	1.0~2.5
HMFN-02	50	2”	0.20~0.80	5.0~12	2~6	0.8~4	2.0~4.0

Peacock Nozzle

Peacock Fountain Nozzle forms the effect of Peacock tail, with direction adjustment, it can also form a group of parabolic water cables.

Module No.	Specification		Operating Pressure（MPa/10）	Water volume (m3/h)	Height
Module No.	（mm）	Inch	Operating Pressure（MPa/10）	Water volume (m3/h)	Height
HPN-01	25	1”	0.05~0.15	3.0~6.0	1.2~2.5
HPN-02	40	1.5”	0.10~1.5	6.0~10	1.2~4.8

Snow-pine Nozzle

Snow Pine Nozzle can form large water columns with air bulbs inside, which looks magnificent in the sunshine.

Module No.	Specification		Operating Pressure（MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure（MPa/10）	Water volume (m3/h)	Height	Covering Area
HSPN-01	25	1”	0.10~1.5	3.0~12	0.6~10	0.12~1.5
HSPN-02	40	1.5”	0.20~2.5	7.0~20	0.8~15	0.2~3.0
HSPN-03	50	2”	0.24~3.0	11~45	0.85~15	0.35~5.0
HSPN-20	20	0.75”	0.10~4.5	2.0~10	0.5~30	0.1~1

Bulb-blowing Spring Nozzle

Bulb-blowing Spring Nozzle makes considerable bulbing sounds, which can add to the watering atmosphere of music fountain. The effect shape is like white column.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HBBN-01	25	1”	0.18~1.0	3.5~5.8	0.65~2.0	0.20~0.8
HBBN-02	40	1.5”	0.10~1.0	4.4~13	0.23~2.5	0.20~1.5
HBBN-03	50	2”	0.26~1.2	8.5~18	0.45~3.8	0.30~1.6

Crystal Bulb Nozzle

Crystal Bulb Nozzle, Water column with bulbs inside, looks marvelous in the sunshine. It's usually used in combination with water curtain, water bridge and Flower patterns.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HCBN-01	25	1”	0.40~1.8	7~14	4~12	0.80~2
HCBN-02	50	2”	0.20~4.5	7~40	2~28	0.60~3.5

Dandelion Nozzle （FOG and Film）

Dandelion Nozzle(FOG and Water film) is globe with radial branch pipes attached. The fog effect can be adjusted by the lid on each branch pipe. This music fountain nozzle is supposed to be used only in fountain waters without much impurities.

Module No.	Specification		Operating Pressure（MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure（MPa/10）	Water volume (m3/h)	Height	Covering Area
HDFN-01	40	1.5”	0.2~0.5	20~35	0.8~1.8	1.2~2.0
HDFN-02	50	2”	0.4~0.8	40~60	0.8~2.5	1.6~2.6
HDFN-03	80	3”	0.5~0.8	50~70	0.8~3.0	2.0~3.0
HDFN-04	100	4”	0.6~1.0	60~80	0.8~6.0	3.0~4.0

Semi-spherical dandelion Nozzle （water film）

Dandelion Nozzle(FOG and Water film) is a semi-spherical globe with radial branch pipes attached. The fog effect can be adjusted by the lid on each branch pipe. This fountain nozzle is supposed to be used only in music fountains without much impurities.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HDHN-01	40	1.5”	0.2~0.43	15 ~ 25	0.1~0.3	1.2~2.5
HDHN-02	50	2”	0.37~0.7	35 ~ 55	0.2~0.5	1.6~2.1
HDHN-03	80	3”	0.5~0.8	60 ~ 70	0.3~0.8	1.5~3.0
HDHN-04	100	4”	0.35~1.0	60 ~ 80	0.3~1.0	2.6~3.6

Double-trumpet Nozzle

Two trumpet patterns, one over the other, has very rich and touching effects. The water pattern looks even better with LED lighting.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume	Height		Covering Area
	（mm）	Inch
					H1	H2	UP	DOWN
HDTN-01	40	1.5”	0.1~0.2	5.0~6.5	0.2~0.3	0.2~0.3	0.45~0.55	0.45~0.7

Crown-trumpet Nozzle

The Nozzle could create a water trumpet on top of a water crown. It is widely used in yard-pools and indoor fountains.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height		Covering Area
	（mm）	Inch
					H1	H2	Trumpet	Crown
PFS-01	40	1.5”	0.1~0.2	3.0~5.0	0.2~0.3	0.4~0.5	0.45~0.5	1.0~1.5

Mist Nozzle

Mist music fountain nozzle produces tiny drops of water, which forms the effect of fog, decorating the space like a fairyland.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	mm	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HMN-01	15	0.5”	0.9-2	0.5-2	2.0-50	5.0-8.0
HMN-02	20	0.75”	0.9-2	0.5-2	2.0-6.0	5.0-8.0
HMN-03	25	1”	0.9-2	0.58-3.5	2.5-6.0	5.0-10
HMN-04	50	2”	0.25-2	0.58-2.68	2.5-7.0	5.0-10

Rotating Nozzle

The reactional force from branch pipes revolves the whole fountain nozzle while in operation. The water will be curved together, resembling a revolving dancing young girl.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height		Covering Area	Revolving Speed （R/min）
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	H1	H2	Covering Area	Revolving Speed （R/min）
HRN-01	25	1”	0.15-1.0	2.5-6.2	1-4	0.7-2.5	1.5-2.5	50-80
HRN-02	50	2”	0.5-1.5	8.0-15	2-8	2.0-8.0	2.0-8.0	55-75

Wind-mill Nozzle

Wind-mill Nozzle is usually installed vertically to the water-surface or at a centain angle to music fountain waters.The water lines from branch nozzles will form the shape of a windmill. Colored light will display the outmost of its charm. Revolving speed could be controlled by the invertor attached to pumps.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area	Revolving Speed（R/min）
	（mm）	Inch
HWN-01	25	1”	0.15-1.0	3.0-10	0.3-2.0	2.0-3.5	52-150

Double Ballet Nozzle

The fountain nozzle can form the effect of double ballet dancing, which is very expressive, touching and impressing.

Module No.	Specification		Operating Pressure（MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure（MPa/10）	Water volume (m3/h)	Height	Covering Area
HDBN-01	25	1”	0.1-0.8	2.0-5.0	0.5-1.5	1.0-2.0
HDBN-02	50	2”	0.1-1.0	3.0-8.0	0.8-3.5	1.6-2.5

Rotating Peacock

Rotating peacock fountain nozzle creates a rotating peacock in the water, with color LED lighting, it looks elegant and vigorous.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HRPN-01	25	1”	0.1-0.8	2.0-4.5	1.0-2.5	1.0-2.0
HRPN-02	50	2”	0.1-1.0	4.0-10	1.5-5.5	1.6-2.5

Crystal Ball Saucer

The upper part creates a deadaline ball and the lower part forms a skirt of water film.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HCBSN-01	50	2”	0.5-0.8	10-20	1.5-1.6	0.8
HCBSN-02	75	3”	0.5-0.8	20-48	2.0-2.25	1.3
HCBSN-03	100	4”	0.8-1.0	30-65	2.5-2.5	2.0

3-Layer Saucer

Made of Stainless Steel, the music fountain nozzle can serve as an elegant statue when it is not in operation.Water falls from the top to the foot and creates three layers of water-film-skirt.

Module No.	Specification		Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
Module No.	（mm）	Inch	Operating Pressure （MPa/10）	Water volume (m3/h)	Height	Covering Area
HTLSN-01	75	3”	0.1-0.5	20-48	1.8	1.3
HTLSN-02	100	4”	0.3-0.6	30-65	2.5	2.0

Vertical Swing Group

Install one or two groups of current musical fountain nozzles onto the pipe with even distance between.With subwater motor and gear system connected, the music fountain nozzles can swing vertically with the same pace. The size of this item is usually designed to the actual musical fountain.

Module No.	Row Q’ty	Distance Between Nozzles) M		Total Length	Total Width	Needed Water Depth	Remark
		S1	S2
HVSG-01	1 row	0.2	0.25	6.0-12	0.3-0.5	0.6	Design to actual need
HVSG-02	2 rows	0.2	0.25	6.0-12	0.3-0.5	0.6

Horizontal Swing Group

Install many pieces of current music fountain nozzles onto the pipe, arrange the pipes into groups（rows）.With subwater motor and gear system connected, the music fountain nozzles can swing horizontally. The swing pace and height can be shifted by the music fountain control system.

Module No.	Specification		Distance Between Nozzles m	Total Width	PC/GROUP	Needed Water Depth	Remark
	(mm)	Inch
HHSG-01	40	1.5”	1.5-2.5	1.0-3.0	12	0.6	Design to actual need
HHSG-02	50	2”	1.5-3.5	1.0-3.0	15	0.6

Seagul Group

Composed of two horizontal music fountain swing groups, Seagul group looks like a thunderbird swinging across the clouds. The swing pace can be adjusted by invertors attached to the water fountain.

Module No.	Specification		Distance Between Nozzles	Total Width	PC/GROUP	Needed Water Depth	Remark
	(mm)	Inch
HSG-01	40	1.5”	0.5-1.0	1.0-3.0	12	0.6	Design to actual need.
HSG-02	50	2”	0.75-1.5	1.0-3.0	15	0.6

Flying Saucer

Flying Saucer is made up of many fountain nozzles installed on a round pipe. It is motivated by subwater motor and gear box.Flying Saucer can move outward and inward with the same pace to create a pattern of UFO, it can also be devided into groups and swing with time sequence to form a blossoming rose. The effect is rich and imposing and it is one of the most-frequently-used patterns for music fountains..

Chasing Jet

Made up of many current music fountain nozzles, each nozzle installed with one digital selonoid valve, Chasing jets can be controlled by computer software and controlling chips to create various patterns and effects. It is a necessary component of large fountains. One or two groups of chasing jets can also be a fountain themselves.

Lighted Jet

Lighted Jets is a special fountain equipment. Water current inside is stablized and doesn't splash even with high pressure. The jet is stable, smooth and won't split in its range. Another significant feature is the the colored lighted is affiliated in itself，as a result, the light can follow the whole water column to the end. In acctual operation, the jet looks like a smooth crystal pole. They are frequently arranged in groups to create an arch pattern, under which people can walk without getting themselves wet.

Jumping Jet

Jumping jet, also named as bullet jet, can shoot pieces of water column to appointed spots.It is a fountain based on lighted jets, consequently, its water columns are also as smooth and don't split in its range.,while it is much more interesting than lighted jets.